Note:This page exists for information purposes only. We no longer offer these products and do not provide any related services.

These chain edged conveyor belts are ideal for medium to high volume applications. These conveyors can be used for MRF sorting line feeds, mixed waste lines, feeding side-eject balers, open end auto tie balers or two ram balers.

belt conveyors

 

  • B class chain conveyor belt is designed for medium volume applications from 5 to 10 tons per hour. Equipped with a wr78 chain (2.609″ pitch mill chain) it has a 220# 2 ply belt. Its below ground configuration allows you a pit length up to 15′ with a width of 5′. It can also be installed as an above ground operation. The shaft height can go up to 13′ and can be equipped with an optional variable speed controller.

  • A class chain conveyor belt is designed for medium to high volume applications from 12 to 20 tons per hour. Equipped with a wr124 chain (4″ pitch mill chain) it has a 330# 3 ply belt. Its below ground configuration allows you a pit length up to 50′ with a width of 6′. The shaft height can go up to 20′ and is equipped with a variable speed controller.

  • AR class chain conveyor belt is designed for high volume applications from 20 to 30 tons per hour. Equipped with a RS933F chain it has a 330# 3 ply belt. Its below ground configuration allows you a pit length up to 120′ with a width of 7′. The shaft height can go up to 20′ and is equipped with a variable speed controller.

LITERATURE / SPECS

document-pdf-icon 24 pixelChain Belt Conveyorsdocument-pdf-icon 24 pixelEZ-TRAX